What are the daily maintenance points of the Disc Granulator?

The Disc Granulator is a granulation equipment widely used in fertilizer, feed, chemical and other industries. Its daily maintenance is essential to ensure the normal operation of the equipment and extend its service life. The following are the daily maintenance points of the Disc Granulator:

  1. Equipment cleaning

After each use, the materials inside and around the disc should be cleaned in time, especially the edge and bottom of the disc to prevent the materials from accumulating and drying. At the same time, the feed and discharge ports of the granulator should also be cleaned to avoid blockage.

  1. Disc inspection

Regularly check the wear of the disc to ensure that the disc surface is not excessively worn to avoid affecting the uniformity of granulation. Check the connection parts of the disc, such as whether the bolts are loose. If they are loose, they should be tightened in time.

  1. Transmission component maintenance

Check the operating status of the transmission components such as the motor, belt and reducer of the Disc Granulator. Ensure that the motor has no abnormal heating, noise, etc., the belt is of appropriate tightness, and the reducer has sufficient lubricating oil.

  1. Nozzle maintenance

The nozzle is responsible for spraying liquids such as binders during the granulation process. Check whether the nozzle is blocked and clean the nozzle’s spray hole regularly to ensure that the liquid can be sprayed evenly. If the nozzle is damaged, it should be replaced in time to ensure the granulation effect.

  1. Operating environment maintenance

Keep the operating environment of the Disc Granulator dry and well ventilated. Avoid humid environment from corroding the equipment. At the same time, good ventilation helps the equipment to dissipate heat and reduce the possibility of equipment failure due to overheating.

  1. Lubrication maintenance

Regularly check and replenish lubricating oil, especially the main bearing, transmission gear and other parts to ensure good lubrication effect.

  1. Regular comprehensive inspection

Perform a regular comprehensive equipment inspection, including the tightening of bolts in various parts and the sealing of the main engine compartment door.

Routine maintenance of the Disc Granulator is a necessary measure to ensure the smooth production, so we must pay attention to the daily maintenance of the Disc Granulator during the production process to extend the service life of the equipment.

Write a comment

您的邮箱地址不会被公开。 必填项已用 * 标注