The crusher is an indispensable equipment in the production process of organic fertilizer. It can crush the raw materials finer and more evenly, which is convenient for the next process. The following are the precautions for the crusher during use:

Preparation before operation

1.Check the equipment: Before starting the fertilizer crusher, carefully check whether the various parts of the machine are intact, including whether the cutter is sharp and firm, whether the protective device is installed in place, etc. At the same time, check whether the tightness of the belt is appropriate. Too loose or too tight will affect the normal operation of the equipment.

2.Clean the work area: Make sure there is no debris around the crusher, especially no metal objects unrelated to the raw materials, so as not to enter the crusher and cause damage. At the same time, ensure that the operating environment is dry and well ventilated.

3.Raw material inspection: The raw materials should meet the processing requirements of the crusher, and should not contain foreign objects that are too large, too hard or entangled to avoid clogging the machine.

Key points during operation

1.Uniform feeding: The feeding speed should be kept uniform, not too fast or too slow. Too fast may cause the machine to overload and damage the motor or cutter. Too slow will affect production efficiency.

2.Material feeding: Feed materials according to the rated capacity of the fertilizer crusher, and do not overfeed. Excessive materials may clog the machine, affect the crushing efficiency, and may even damage the motor.

3.Operation monitoring: During the operation of the crusher, pay close attention to the operating status of the equipment, including the motor current, temperature, and vibration of the machine. If abnormal sound, vibration or odor is found, the machine should be stopped immediately for inspection.

Maintenance after operation

1.Shutdown sequence: Stop feeding first, and then turn off the motor after the raw materials in the crushing chamber are basically crushed, so as to avoid the remaining raw materials causing difficulties in starting next time.

2.Cleaning and maintenance: Clean the residual materials inside and outside the fertilizer crusher in time, check and sharpen the knives as necessary. And conduct a comprehensive inspection of the equipment to prepare for the next use.

During use, these operating precautions must be strictly followed to ensure the safe and efficient operation of the crusher. Thereby reducing the probability of failure.